PRODUCTS SPECIFICATION

Product size

unit:mm

Product structure and installation

Main Specification:

Item Denomination	Specification
Rated voltage and frequency	110V/220V, 50Hz/60Hz
Maxrated power	450W
Warm water tank volume	1.2L
Water temp. regulating range	20ºC-40Cº
Water jetting amount	(0.65~1.8)L/Min
Dry air speed	(4~6)m/s
Dry air temperature	4-section regulating, 30ºC-40Cº
Bowl ring surface temperature	About 40Cº

How to use:

1, Connect the power with the plug. At the bell sound, please. check the water inlet valve of the water tank for its opening state. at which the water begins to flow into the tank and the temperature screen displays the temperature of the water in the tank.

2, If necessary to heat the bowl ring in the cold weather, please, push the ¡°bowl ring heating¡± key, at which the indicator lamp lights up and the ring is in heating and working for a long time. Pushing the key again is to turn off the indicator lamp and stop the heating of the bowl ring.

3, When at service, the pressure switch under the bowl ring will be connected (a music will be heard), at which the rinsing and drying organisms are in the stand-by state for 15 minutes. With no person setting on the bowl ring neither the rinsing nor drying function will start.

4, Warm water rinsing: push the ¡°general rinse¡± key and the general rinse rod will stretch out to start rinsing the anus with warm water. Push the same key again to draw back the rinsing rod and stop rinsing. Push the ¡°lady-purpose¡± key, at which the special purpose rod stretches out to rinse the vaginal orifice with warm water. Push the same key again to draw back the special rod and stop rinsing. (To switch to the ¡°lady-purpose rinsing¡± during the ¡°general rinsing¡±, just push the ¡°lady-purpose sensing¡± key directly¡± rod, but the ¡°special-purpose¡± rinse rod stretches out)

5, Air drying: push ¡°Dry 1¡±or¡± Dry 11¡±and to blow out the air from the left vent; push ¡°Quick Dry1¡± or ¡°Quick Dry11¡± to blow the air from the right vent. Dry and Quick Dry can be used synchronuously to accelerate the dry speed. To stop drying just repush the above mentioned keys only.

6, Regulating the water temperature: Push ¡°High Water Temp:¡± to raise up the temperature of water and push ¡°Low Water Temp¡± to lower it down. The water temperature is freely adjustable between 20¡£C-40¡£C.

7, Regulating the water pressure: Push ¡°Water Pressure Regulating¡± continuously to regulate the water pressure between the three positions ¡°High ¡°Middle¡± and ¡°Low¡± in circulation.

8, Regulating the air temperature: 4 air temperatures are available for selection according to the different seasons. Push Dry ¡°1¡± and ¡°Quick dry 1¡± to have the 1^st (lowest) position of temperature; push ¡°Dry 11¡± and ¡°Quick dry 1¡± to have the 2^nd position of temperature; push ¡°Quick dry 1¡± and ¡°Quick dry 11¡± to have the 3^rd position; push ¡°Dry 11¡± and ¡°Quick dry 11¡± to have the 4^th position.

9, Power switch: normally please don¡¯t operate this switch. If pushed, all the fuctions of the keys on the operation board will stop. In such case, push the power switch again to resume them.

Attentions:

When rinsing, water will ooze out of the nozzle to cleaning the nozzle.

In the course of rinsing if one wants to stand up, he (she) must push the corresponding rinse switches (¡°General rinse¡± and ¡°Special rinse¡±), and shouldn¡¯t stand up until the water jetting stops. The rinse rod shall be cleaned periodically to keep clean and provide a free water outlet.

Safety regulations

1, Please, read this instruction carefully before use.

2, Before use please, check the earthing jack on the power socket which is to connect with the power plug on the toilet bowl the jack shall be reliably earthed.

3, This product requires AC power of 220V rated voltage, 50Hz or 60Hz frequency.

4, Treading with foot and striking with heavy objects on this product are strictly forbidden.

5, This product shall be set far away from fire source and spraying water on it is strictly forbidden.

6, Children can use this product only with adult¡¯s care and never allow them to touch the product alone by themselves.

7, Never turn off the product with wet hand and don¡¯t give the power cable a hard pull.

8, If no use for a long time, take the power plug off the socket and discharge the water from the warm water tank so as to avoid icing-up in winter.

9, In case of abnormality, stop using immediately, take off the power plug and call personnel from local service station or professional technician for repair.

Usual Abnormalities and Solutions

Phenomenon	Reason	Solution
Power non-connectable	Socket non connected or the plug not inserted to the bottom of the socket	Check if the socket is connected and the plug is inserted to the bottom of the socket
No water in the water tank (EO displayed)	Too low pressure of the tap water	Increase the water pressure
	Water-inlet filter blocked	Clean the filter
No water jetting	The pressure switch not connected	Check the pressure switch.
	Micro-holes in the jetting rod blocked	Clean the water outlet of the jetting rod.
	No water in the warm water tank	Eliminate the problem with water inlet.
Improper temperature of jetting and cleaning water	The water temperature switch not set at a proper temperature.	Set the temperature again.
	Something wrong with the temperature controller	Change the temperature controller.
Leakage from the spray nozzle	Sealing rubber ring of the jetting rod is no good	Change the sealing rubber ring of the jetting rod.
The bowl seat isn¡¯t warm	The bowl seat ring heating key not in a good contact.	Eliminate the push key problem.
The body of the unit loosened	The fixing bolt is loosened	Tighten up the bolt.